Текст страницы
3 Using the appliance
3.1 Use of the appliance
A
B
C
D
E
1
2
1
A: 1. Stage
Button
Operates the appliance on 1st
speed. When you press this
button again to turn off the
appliance, the screen speed
stage turns off.
B: 2. Stage
Button
Operates the appliance on
2nd speed. When you press
this button again to turn off
the appliance, the screen
speed stage turns off.
C: Digital
Display
Shows the selected speed
and warning symbols.
D: 3. Stage
Button
signal appearing again.
Automatic Stop 15 minutes:
Your appliance has an automatic stop
feature in order to remove unwanted
odour and steam remaining in the envi
ronment after the cooking process has
finished and for the appliance to turn it
self off after conducting a ventilating pro
cess for a period of time. To activate the
automatic stop feature; press the same
button for the current speed (A,B,D) for 3
seconds. After 15 minutes of operation,
all functions of your appliance will stop.
If you press the same speed button while
the automatic stop feature is active, the
automatic stop function will be disabled
and the motor of the appliance will stop.
This feature will be disabled when you
switch to different speed levels. It is nec
essary to activate the automatic stop
feature of the device.
Operates the appliance on 3rd
speed. When you press this
button again to turn off the
appliance, the screen speed
stage turns off.
3.2 Energy efficient usage
E: Light On
/ Off
• When using your appliance, adjust the
You may illuminate the cook
ing area by pressing this but
ton. Re-press the button to
turn off the lamp.
speed settings according to vapour and
odour intensity, in order to save energy.
• Use low speeds (1-2) under normal
conditions, and high speed (3) and
boost mode for intense odour and va
pour.
• The hood is equipped with lamps in
order to illuminate the cooking area.
• Using them for environmental lighting
shall cause unnecessary energy expen
diture and insufficient lighting.
• For your device to consume less
energy, run it at a low speed level.
• Your device will reduce energy con
Cleaning Periods of Metal Filters:
Filters must be cleaned when the “C” sig
nal is seen on the display (once every 60
hours) or every 4 weeks (depending on
usage). After the filters are cleaned and
mounted, press the A button for more
than 3 seconds to clear the “C” signal
(when the product is off). The letter E
will appear on the display and normal
operation will commence. If you want to
continue operating without deleting the
C signal, when you press any of the step
buttons, the active speed will appear for
1 second and the motor will continue to
operate at the selected step with the C
sumption as it will run more efficiently
when you provide sufficient air intake
to it.
10 / EN
Cooker Hood / User Manual