Текст страницы
3 Using the appliance
3.5 Operation with chimney connection
•
Vapour is extracted through the flue duct, which is fastened to the
connection head on the hood.
•The diameter of the flue duct must be the same as the connection
ring. In horizontal settings, the pipe has to have a slight upward slope
(around 10º) so that the air can exit the room easily.
3.6 Operation without chimney connection
•
Air is filtered through the carbon filter and recirculated in the room.
Carbon filter is used when it is impossible to use a flue in the house.
•In flueless use, remove the flaps inside the flue adapter.
•Remove the aluminum grease filter. To install the carbon filter, fit the
filter to the tabs by centring it on the plastic piece on both sides of the
fan body. tighten it by turning right or left.
• Replace aluminum grease filter.
4 Cleaning and maintenance
Clean using only a cloth dampened with
a neutral liquid detergent. Do not use
abrasive products or alcohol.
4.1 Cleaning of the grease filter
The device should be cleaned and main
tained regularly. Failure to keep the de
vice clean will adversely affect the ser
vice life of the device. For cleaning and
maintenance, follow the instructions
stated in the manual.
C
This filter retains the oil particles in the
air. Grease filter may change colour as
they are washed; this is normal and does
not require replacing your grease filter.
Before cleaning and mainte
nance, unplug the product or
turn off the switch.
Non-compliance with the pro
visions associated with the
cleaning of the device and
replacement of the filters
may result in a risk of fire.
Therefore, it is recommended
to follow the guidelines stat
ed here. The manufacturer is
not responsible for the engine
damages or fires originating
from the improper use.
12 / EN
Cooker Hood / User Manual