Текст страницы
Wi-Fi Connection
In standby mode, press and hold the keep warm and boil buttons for 7 seconds and the buzzer
will beep once to indicate the start of Wi-Fi resetting. At this time, the Wi-Fi indicator is blinking
and you need to connect the network through the Xiaomi Home app. Once connected, the
Wi-Fi indicator will remain on.
Enable/Disable Wi-Fi
The Wi-Fi is disabled by default when the kettle is turned on for the first time.
In standby mode, press and hold the keep warm button for 7 seconds to enable/disable Wi-Fi.
Wi-Fi Status
Waiting for connection…: Wi-Fi indicator blinks slowly.
Connecting…: Wi-Fi indicator is on.
Connected successfully: Wi-Fi indicator is on.
Cleaning & Maintenance
1. Add 0.5 L of food-grade white vinegar and leave to soak for at least 1 hour.
2. After pouring out the white vinegar, wipe out any remaining sediment with a damp cloth.
3. Add water (above minimum mark and below the maximum mark) and pour out after it boils, and then use clean water
to rinse the kettle for 4-5 times.
4. Use a dry cloth to clean the outside of the kettle. Keep the kettle in a dry, well-ventilated area, and protect it from dust,
moisture, and insects.
Precautions:
1. Make sure the kettle is unplugged and let it cool down before cleaning.
2. Regularly remove limescale and sediment inside the kettle to extend its service life.
3. If there is serious limescale buildup, please repeat the steps above. Do not use steel wool or any chemical or abrasive
cleaning agents.
4. Do not immerse the kettle or the base in water, and keep its exterior dry.
5