Текст страницы
6
English
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/welcome.
Read this user manual, the important information leaflet, and the quick start guide carefully before you use
the appliance. Save them for future reference.
Product overview (Fig. 1)
1 Soleplate
2 ‘Iron ready’ light
3 Steam trigger/Steam boost
4 Water supply hose
5 Iron platform
6 Carry lock release button
7 Water tank release lever
8 Filling hole
9 Detachable water tank
10 Water supply hose storage compartment
11 Mains cord with plug
12 Smart Calc-Clean container
13 CALC-CLEAN button with light
14 On/off button with power on and shut-off light
Preparing for use
Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an area with hard
water, fast scale build-up may occur. Therefore, it is recommended to use distilled or demineralized water
(50% demineralized/distilled water mixed with water could be used as well) to prolong the lifetime of the
appliance.
Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling
agents, ironing aids, chemically descaled water or other chemicals, as they may cause water spitting,
brown staining or damage to your appliance.
Filling the water tank
Fill the water tank before every use or when the water level in the water tank drops below the minimum
level. You can refill the water tank at any time during use.
1 Press the lever in the water tank handle and remove the water tank from the base (Fig. 2).
2 Fill the water tank up to the MAX indication (Fig. 3).
3 Push the water tank back into the appliance until it locks in place (‘click’).
Using the appliance
Ironable fabrics
Do not iron non-ironable fabrics.
-
Fabrics with these symbols (Fig. 4) are ironable, for example linen, cotton, polyester, silk, wool, viscose
and rayon.
-
Fabrics with this symbol (Fig. 5) are not ironable. These fabrics include synthetic fabrics such as Spandex
or elastane, Spandex-mixed fabrics and polyolefins (e.g. polypropylene). Prints on garments are not
ironable either.