Текст страницы
18
English
Warning icons
Solution
Warning
icon
The 'water tank empty' light is on
-
The water tank is almost empty. Fill the water tank with fresh water to the maximum
level indication.
-
The water tank is not in place. Place back the water tank.
The 'empty coffee grounds container' light is on
-
The coffee grounds container is full. Remove and empty the coffee grounds container
while the machine is switched on. Wait at least 5 seconds before you reinsert the
container.
The alarm light is on
-
The coffee grounds container and/or the drip tray is not in place or not placed
correctly. Place back the coffee grounds container and/or the drip tray and make sure
they are in the correct position.
-
The service door is open. Remove the water tank and make sure the service door is
closed.
The alarm light is flashing
-
The brew group is not in place or not placed correctly. Remove the brew group and
make sure it is locked into place. See chapter 'Removing and inserting the brew
group' for step-by-step instructions.
-
The brew group is blocked. Remove the brew group and rinse it with water under the
tap. Then lubricate the brew group and place it back into the machine. See chapter
'Cleaning and maintenance' for step-by-step instructions.
The alarm light is on and the start light flashes.
Some air is trapped inside the machine. To release the air from the machine, fill the water
tank with water, place a cup under the classic milk frother and press the flashing
start/stop button.
Be careful: small jets of hot water will be dispensed from the classic milk frother to
release the air.
AquaClean light is flashing: place or replace the AquaClean water filter and activate it. See
chapter 'AquaClean water filter' for step-by-step instructions.
Descaling light is on continuously: Descale the machine.