Текст страницы
Calibrate the camera after installation. Avoid calibrating in large uniform color areas (such
as white walls, grass, cement, or glass). Do not move the device during calibration, as this
might impact both the success rate and accuracy.
Figure 6-8 Calibrate
Step 3
Select Calibrate , and then click Enter to start the automatic calibration.
Figure 6-9 Calibration progress
After calibration is complete, the Calib Status displays as Calibrated. If calibration fails,
retry automatic calibration or use the manual calibration function of the XVR.
Calibration is only supported on select models and their specific software versions of the
XVR.
Figure 6-10 Calibration failed
Step 4
Select Manual Linkage , and then click Enter to go to the Area Setting page. Move the
area box in the Fixed Lens image, and the PT Lens will adjust to the corresponding
position of the area box to ensure the accuracy of the calibration.
18