Текст страницы
8.3 Device Installation
Background Information
The device is delivered without mounting bracket and screw. You need to purchase them
separately.
Figure 8-6 Device components
Table 8-1 Device components
No.
Name
No.
Name
1
Lens
5
Mounting bracket
2
Front panel
6
Self-tapping screw
3
Fixing screw
7
Expansion bolt
4
Bracket adjusting screw
8
Mounting surface
Procedure
Step 1
Fix the mounting bracket ⑤ on the mounting surface ⑧.
1. Mark the bracket mounting hole positions on the mounting surface ⑧, drill four holes
on the marked positions, insert four expansion bolts ⑦ into the mounting holes and
then tighten.
2. Align the four screw holes on the bottom of the mounting bracket ⑤ with the
expansion bolts, insert four self-tapping screws ⑥ and then tighten.
Step 2
Fix the device on the mounting bracket ⑤.
Align the mounting hole positions on the bottom of device casing with the mounting
holes positions on the mounting bracket ⑤, and then install the device on the mounting
bracket with fixing screw ③.
Step 3
Adjust camera monitoring angle.
Use a wrench to loosen the adjusting screw ④, adjust camera to the location which needs
to be monitored, and then use wrench to tighten bracket adjusting screw ④ to fix the
device.
Step 4
Connect the cable to the back panel of the device.
28