Текст страницы
●If you select Camera Set, the sound and light alarm will be triggered in the device.
●If you select XVR Set, the sound and light alarm will be triggered in the XVR.
For details, see XVR user’s manual.
7.3 Configuring Light Warning and Audio Alarm
This function is available only when the trigger mode is set to Camera Set.
●On the OSD menu (Figure 3-7 ), select Alert . Set Light Warning to ON, and then enter the item.
For Mode , you can select from Lighting to Flash. If you select Flash, you can set the Flash
Frequency to Low, Medium or High.
For Alert Duration , you can adjust from 5 seconds to 60 seconds.
●On the Audio Alert item, set it to ON, and then enter the item.
In the Audio item, you can select from 3 audios.
In the Volume item, you can select from Low, Medium and High.
In the Alert Duration , you can adjust from 5 seconds to 60 seconds.
7.4 Configuring Smart Dual Illuminators Active Deterrence Camera
Background Information
For details on configuring smart dual illuminators, see "5 Smart Dual Illuminators Cameras
Configuration".
Procedure
Step 1
Select Main Menu > Alert, and then set Audio Alert to ON.
Step 2
Set the Volume and Alert Duration.
The shortest of alert duration is 5 s, and the longest is 60 s.
Step 3
Select 5 different audio clips (including Alarm , No parking here, Private land no entry,
Warning zone keep off, and Welcome).
You can also DIY the first clip to a .bin file and import to the back-end to use.
22