Текст страницы
6 Maintenance and care
2. Place the burner cap on the burner head.
Glass ceramic surface
Wipe the glass ceramic surface (vitroceramic)
with cold water, paying attention to leave no resid
ual cleaning agents, and dry with a soft clothing.
Residues may cause damage on the glass ceramic
surface when using the hob for the next time.
Dried residues on the glass ceramic surface (vit
roceramic) should under no circumstances be
scraped with hook blades, steel wool or similar
tools.
Remove calcium stains (yellow stains) with com
mercially available lime remover or a small amount
of lime remover such as vinegar or lemon juice.
If the surface is heavily soiled, apply the cleaning
agent on a sponge and wait until it is absorbed
well. Then, clean the surface of the hob with a
damp cloth.
C
Sugar-based foods such as thick
cream and syrup must be cleaned
promptly without waiting the sur
face to cool down. Otherwise, glass
ceramic surface may get damaged
permanently.
Slight color fading may occur on coatings or other
surfaces in time. This does not affect the operation
of the product.
Assembling the burner parts
Color fading and stains on the glass ceramic sur
face is a normal condition, and not a defect.
After cleaning the burner, place the parts as shown
below.
6.2 Cleaning the control panel
Clean the control panel and knobs with a damp
cloth and wipe them dry.
C
If your product is equipped with
buttons/knobs do not remove the
control buttons/knobs to clean the
control panel. Control panel may get
damaged!
1. Burner cap
2. Burner head
3. Burner chamber
- Spark plug (in products with igniter)
- Place the burner head ensuring that it passes
through the burner spark plug (4). Turn the
burner head right and left to make sure that it is
seated in the burner chamber.
26 / EN
Built-in Hob / User Manual