Текст страницы
10
EN
OVERHEATING PROTECTION
• If you accidentally switched the kettle on, but the water
level appeared to be below the minimal mark, the
automatic thermal switch will be on and the kettle will
switch off. In this case take the kettle from the base
(7) and let it cool down for 10-15 minutes, then fill the
kettle with water and switch it on, the electric kettle will
operate in normal mode.
CLEANING AND MAINTENANCE
• To remove scale, you can use special scale-removing
agents, as well as household ones, for example,
vinegar or citric acid.
• Dissolve 25 g of citric acid in 500 ml of hot water,
add water up to the maximum volume of water in the
kettle.
• Pour the resulting solution into the kettle and leave
for it 15-30 minutes. If necessary, you can turn on the
water boiling mode.
• Pour out the liquid and rinse the flask (5) several
times, boil water several times.
• You can use special detergents for electric kettles or
coffee machines to remove scale, strictly following the
instructions on their usage which should be placed
on the packing of the detergent or in supplemental
materials provided by the seller.
• Clean the kettle from scale regularly.
STORAGE
• Before cleaning disconnect the kettle from the mains,
pour out water and let the kettle cool down.
• Wipe the base (7) and the outer surface of the flask (1)
with a slightly damp cloth, and then wipe the base (7)
and the flask (1) dry. Use soft detergents to remove dirt,
do not use metal sponges, abrasive detergents and
solvents.
• Do not immerse the kettle, the kettle stand (7), power
cord and power cord plug in water or any other liquid,
do not wash the kettle in the dishwasher.
DESCALING
• Before taking the kettle away for long storage, unplug
it, pour out water and let the unit cool down.
• Clean the base (4) and the flask (5).
• Fix the power cord at the power cord storage (8) on
the kettle stand (7).
• Keep the kettle in a dry cool place out of reach of
children and disabled persons.
• Scale, appearing inside the flask (1), influences the
water taste and disturbs the heat exchange between
water and the heating element and also creates a risk
of failure of the heating element, the burnout of the
heating element because of large amount of scale in
the flask (1) is not covered by warranty.