Текст страницы
9
EN
(11) «
», (12) «
» or (13) «
Note: the digital values of the water temperature depend
on the volume of water in the kettle flask (1), especially
at the minimum water level, and may be slightly different
from the readings when measuring the water temperature
with other measuring units.
» and set the desired
water heating mode 40-70-80-90°C; at that, the
temperature to which the water in the kettle flask (1)
will heat up will be shown in digital characters (9).
• If you need to turn on the water temperature
maintenance mode, press the water temperature
maintenance function button (16) « » in standby mode,
and the backlight of the button (16) « » will be flashing.
Notes:
• Upon completion of the water boiling mode you will
hear a sound signal, the backlight of the buttons (14,
15) «
,
» and the button (16) « » will go out.
• After 30 seconds, the water heating temperature digital
characters (9) will go out, the On/Off button (17) «
»
will go into standby mode.
• If you need to switch the kettle off during boiling, press
the On/Off button (17) «
».
Notes: after water boiling, droplets may appear on the
surface of the stand (7) due to steam condensation. This
is a normal phenomenon and is not a warranty case;
WATER HEATING TO A SET TEMPERATURE
/ TURNING ON THE WATER TEMPERATURE
MAINTENANCE FUNCTION
-
if in the temperature maintenance mode, the water
temperature drops below the set value by 5 degrees,
the heating element will turn on, the water will heat up
to the set value and the warming up function will turn
on for another 2 hours;
-
the water temperature maintenance mode at 100°C is
inactive and is solely used for boiling water.
• To turn off the water temperature maintenance function,
press the On/Off button (17) «
», the water temperature
maintenance function will be turned off.
Note: the memory function is switched on in the water
temperature maintenance mode, if you removed the kettle
from the base (7) 10 times and the water temperature did
not go down by 8 degrees below the set temperature, the
water temperature maintenance function will be active, if
the water temperature goes down by more than 8 degrees
from the set temperature, then the water temperature
maintenance function will be switched off.
• You can heat water to the required temperature
(40-70-80-90°C). Different tea types have different
recommended water temperatures.
• Recommended water temperature:
• 40°C - for baby food and other needs, 70-80°C - for
white and green tea, 90°C - for instant coffee, 90°C -
for black tea.
• In standby mode, briefly press the button (10) «
»,