Текст страницы
GO Ultra User Manual
5.3 Cleaning
1.
If foreign objects, such as dirt or hair, are on the Lens Guard, clean it with clean
water or use a lens pen, air blower or cloth.
2.
If the lens contains foreign objects, such as dirt or hair, clean it with a lens pen,
air blower or cloth.
5.4 After Underwater Use
After using GO Ultra with the AquaLens for underwater shooting, switch back to the
standard Lens Guard for the best results. Because of the high humidity underwater,
some moisture may remain on the lens when changing guards, which could lead to
fogging in later shots.
To get back to clear shooting quickly, we recommend the following steps:
1.
Shake the device 3-5 times to remove as much water as possible from the
surface.
2.
Remove the AquaLens and wipe the lens barrel thread area with a clean paper
towel/cleaning cloth.
3.
Shoot for about 5 minutes at 4K/60fps to allow the camera body to warm up
slightly and help evaporate any residual moisture; or use a hair dryer on the cool
setting and blow air onto the lens area for about 5 minutes.
4.
Once you have confirmed that the lens barrel is completely dry, reinstall the
standard Lens Guard onto the camera lens.
Note:
•
The removed standard Lens Guard can be dried with a hair dryer on the cool
setting to prevent fogging during the next underwater shoot.
•
When replacing the Lens Guard, do so in a dry, well-ventilated environment to
reduce the risk of moisture residue.
38