Текст страницы
5
The design of the power tool facilitates making angled
saw cuts by angling the case of the power tool. The base
plate
of the power tool contains a scale
which
marks the angles of the casing of the power tool (the step
is 15°). If additional measuring instruments are used, one
may position the casing of the power tool at any angle
Use Allen key
to loosen bolt
Shift the base plate
forward (depending upon the
previously installed angle of the casing) and select the
needed angle of the casing using the readings of the
scale
or the readings of the additional measure-
ment instrument.
Use Allen key
to tighten bolt
.
Perform sawing as described above.
Power tool maintenance / preventive
measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean. Regularly
ventilation slots .
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.dwt-pt.com
Transportation of the power tools
Categorically not to drop any mechanical impact on
the packaging during transport.
When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging.
Environmental protection
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging should
be sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper man-
ufactured without chlorine.
The manufacturer reserves the possibility to introduce changes.
11
English