Текст страницы
9
EN
STANDBY MODE
Notes:
• After 10 minutes of inactivity the Control Panel (2) will
turn off, and the Kettle will enter standby mode.
• You can activate the standby mode manually by
pressing and holding down the «
» Power Button (17);
this will cause the Control Panel (2) to turn off.
• To exit the standby mode, press the «
» Power Button
(17).
Note: in the standby mode only the «
» Power Button
(17) is live; the other buttons are disabled.
ACTIVATING THE KEEP WARM MODE
-
the timer for the Keep Warm Mode will start only
after the water has heated to the set temperature (±5
degrees from the set temperature);
-
the Keep Warm Mode at 100°C is inactive and is
solely used for boiling water.
-
in the Keep Warm Mode, the memory function is
activated. If you remove the Kettle from the Base (8)
10 times and the water temperature does not drop
more than 8 degrees below the set temperature, the
Keep Warm Mode will remain active. If the water
temperature drops more than 8 degrees below the set
temperature, the Keep Warm Mode will deactivate.
CLEANING AND MAINTENANCE
• Before cleaning disconnect the kettle from the mains,
pour out water and let the kettle cool down.
• Wipe the base (8) and the outer surface of the flask (1)
with a slightly damp cloth, and then wipe the base (8)
and the flask (1) dry. Use soft detergents to remove dirt,
do not use metal sponges, abrasive detergents and
solvents.
• Do not immerse the kettle, the kettle stand (8), power
cord and power cord plug in water or any other liquid, do
not wash the kettle in the dishwasher.
DESCALING
• You can activate the Keep Warm Mode (40-50-80-
90-95-100°C). Different tea varieties require specific
different water temperatures.
• Recommended water temperature: 40°C - for baby food
and other purposes, 50°C - for white tea, 80°C - green
tea, 90 - black tea, 95°C - for coffee.
• Use the «+» button (16) or the «-» button (18) to select
the desired keep warm temperature (40-50-80-90-95-
100°C). The corresponding symbols (21, 22, 14, 19,
20, 15) with the names of the products the selected
temperature is intended for will appear.
• After selecting the desired keep warm temperature,
press the «+» button (16) or the «-» button (18) and
hold it down for 2-3 seconds. The « » symbol (12) will
turn on on the Control Panel, indicating that the Keep
Warm Mode is active.
• The Keep Warm Mode remains active for 4 hours.
• Scale, appearing inside the flask (1), influences the
water taste and disturbs the heat exchange between
water and the heating element and also creates a risk