Текст страницы
4 Operation of the appliance
2. Place a suitable pan on the selected cooking
zone.
Using power management you can set the total
power to 3.0kW/7.2kW. The default total power
setting is the maximum power level.
Setting the total power level to fit your requirement
Make sure the cooktop is turn off.
You can only set power manage
ment when the cooktop is turn off.
C
From 7.2kW switchover to 3.0kW :
C
Make sure the bottom of the pan and
the surface of the cooking zone are
clean and dry.
3. Touch the cooking zone selection key and the
indicator on the display next to the key will flash.
When you first time to use the cooktop, pls noted
the default status is 7.2kW . First touch the but
ton stop +go and hold for 5 seconds. You can hear
the buzzer beeps one time and flashing the “7.2”
,when the power “7.2” in flashing, touch and hold
the boost for 5 seconds that will flashing another
power “3.0”,and then touch the button stop +go
and holds for 5 seconds, the buzzer will beep 10
times,It means you have finished the setting.
From 3.0kW switchover to 7.2kW.
4. While the number is flashing,set the power level
by repeatedly touching + or - control.
First touch the button stop +go and hold for 5 sec
onds.You can hear the buzzer beeps one time and
flashing the “3.0”, when the power “3.0” in flashing,
touch and hold the boost for 5 seconds will flash
ing to “7.2” and then touch the button stop +go
and holds for 5 seconds, the buzzer will beep 10
times,It means you have finished the setting.
4.1 To start cooking
• If you don’t choose a heat setting within 1 min
• After power on, the buzzer beeps once, all the
ute, the cooktop will automatically switch off.
You will need to start again at step 1.
indicators light up for 1 second then go out, in
dicating that the cooker has entered the state of
standby mode.
• You can modify the heat setting at any time dur
ing cooking.
1. Touch the ON/OFF button, all the indicators
show “-” or “--”.
If the display flashes “
” alternately with the
heat setting it means that either:
• you have not placed a pan on the correct cooking
zone or,
• the pan you’re using is not suitable for induction
cooking or,
• the pan is too small or not properly centred on
the cooking zone.
Induction Hob / User Manual
13 / EN