Текст страницы
4 Operation of the appliance
Only the Zone 1 and Zone 3 with
boost function.
C
No heating takes place unless there is a suitable
pan on the cooking zone. The display will automat
ically turn off after 1 minute if no suitable pan is
placed on it.
Using boost to apply more power
1. Touch the heating zone selection control that
4.2 When you have finished cooking
1. Touching the heating zone selection button that
you intend to boost, an indicator next to the key
will flash on the display.
you wish to switch off.
2. Touch the boost function control and the cook
2. Repeatedly touch “-” control to drop to “0”.
ing zone will begin to work in boost mode. The
power display will show “P” to indicate that the
zone is in boost mode.
3. Boost power will last for 5 minutes and then the
3. To switch off cooking zones by touching ON/
OFF control.
zone will go back to the power level which was
set before boost.
4. If you want to cancel the boost function during
4. Beware of hot surfaces “H” (Residual Heat
the 5 minutes operating time, touch the cooking
zone selection control, and an indicator next to
the key will flash. Then touch the boost function
control and the cooking zone will go back to the
power level which was set before boost.
If exit Boost automatically after 5 minutes, will
go back to the power level which was set before
boost.
Indicator) will show which cooking zone is hot
to touch. It will disappear when the surface has
cooled down to a safe temperature. It can also
be used as an energy saving function by using
the zone that is still hot to heat other pans.
Power management
4.3 Using the boost function
Your hob is divided into two groups. You can only
boost 1 zone in each group, and the corresponding
zone must be at or below Power Level 5.
The Boost function is a function that maximizes
power to a selected cooking zone. When activated
the function lasts for 5 minutes and provides more
powerful, faster cooking e.g. to heat a large pot wa
ter to cook rice or pasta.
14 / EN
Induction Hob / User Manual