Текст страницы
Operation Manual
Parameter
Description
During the configured period, the duplicate faces are displayed only once
to avoid repeated counting.
Click
to configure the parameter, and then click Apply.
Remove Duplicate
Faces
●Time : During the configured time, the function is enabled.
●Precision : The larger the precision value, the higher the accuracy.
Set a range for the captured face image, including face, one-inch picture,
and custom.
When selecting Custom , click
, configure the parameters on the
prompt page, and then click Apply.
Face Cutout
●Customized width: Set snapshot width; and then enter the times of
the original face width. It ranges from 1–5.
●Customized face height: Set face height in snapshot; and then enter
the times of the original face height. It ranges from 1–2.
●Customized body height: Set body height in snapshot; and then enter
the times of the original body height. It ranges from 0–4.
When the value is 0, it cuts out the face image only.
●General mode:
Snapshot Mode
Optimized Snapshot : Capture the clearest picture within the
configured time after the camera detects face.
Recognition Priority : Repeatedly compare the captured face to
the faces in the armed face database, and capture the most similar
face image and send the event. We recommend you use this mode
in access control scene.
Click Advanced to set the optimized time.
●Counting mode: The snapshot mode is tripwire by default, and you
cannot change it.
Property
Click
next to Property to enable the properties display.
Face Beautifying
After enabling this function, you can adjust the level. The higher the level,
the higher the beautifying level.
Select the mode to enhance the snapshot.
●Auto: The system automatically improves the quality of the snapshot.
Face Snapshot
Enhancement
●Manual: You can adjust NR Level , Sharpening Level, Brightness
Level and Redness Level manually.
●Off: Turn off the function.
Face Exposure
Enable Face Exposure. When a face is detected, the camera can enhance
brightness of the face to make the face image clear.
Face Target Brightness Set the face target brightness. It is 50 by default.
124