Текст страницы
Operation Manual
Table 10-4 Description of FTP parameters
Parameter
Description
Server IP
The IP address of the FTP server.
Port
The port number of the FTP server.
Username
The username to log in to the FTP server.
Password
The password to log in to the FTP server.
Storage Path
The destination path in the FTP server.
Directory Structure
Set the directory structure, and you can select Use Level 1
Directory , Use Level 2 Directory, and Use Level 3 Directory.
Set the Level 1 directory name, and you can select from Device
name , Device IP, and Custom.
Level 1 Directory
When you select Custom, please enter the custom directory.
Level 2 Directory
Set the Level 2 directory name, and you can select from File Type ,
Date, File Type_Channel Number, and Custom.
When you select Custom, please enter the custom directory.
Level 3 Directory
Urgently store to local
Click
, and when the FTP server does not work, all the files are
saved to the internal SD card.
Step 6
Click Save.
Step 7
Click Test to test whether FTP function works normally.
10.4.2.2 NAS
Enable this function, and you can save all the files in the NAS. Procedure
Step 1
Select Record > Storage.
Step 2
Select the recording strategy in Disk Full.
●Overwrite : Cyclically overwrite the earliest video when the disk is full.
●Stop : Stop recording when the disk is full.
Step 3
Select Network storage in Storage Method, and select NAS to save the recorded videos
in NAS server.
Step 4
Select NAS protocol type.
●NFS (Network File System): A file system which enables computers in the same
network share files through TCP/IP.
●SMB (Server Message Block): Provides shared access for clients and the server.
220