Текст страницы
Operation Manual
13.6 Advanced Maintenance
13.6.1 Export
Export the serial number, firmware version, device operation logs, configuration information, and other information. Procedure
Step 1
Select Maintenance Center > Advanced Maintenance > Export.
Figure 13-10 Export
Step 2
Click Export , and the page will display the export progress. Click End Export to cancel
the current export.
After the export is complete, the page will prompt Exported successfully.
13.6.2 Packet Capture
Retrieve network interaction data between the camera and a specified network card on the client, and store it on the computer. Procedure
Step 1
Select Maintenance Center > Advanced Maintenance > Packet Capture.
Figure 13-11 Packet capture
Step 2
(Optional) In the Packet Capture area, set the IP addresses and ports for IP 1: Port 1 and
IP 2: Port 2 respectively.
Obtain the network interaction data between the camera and the specified client.
●The addresses and ports of IP 1: Port 1 and IP 2: Port 2 cannot be the same.
●IP 1: Port 1 and IP 2: Port 2 are optional, you can enter one IP address and port or
leave them blank.
Step 3
Capture.
Click
to start capturing. Packet Sniffer Size will display the size of the packet.
Click
to end capturing. The capture file will be saved locally.
250