Текст страницы
Operation Manual
Parameter
Description
Enter No.
Counts the number of people entering in the
direction A-->B. When the number exceeds the
configured value, an alarm will be triggered.
Exit No.
Counts the number of people entering in the
direction B-->A. When the number exceeds the
configured value, an alarm will be triggered.
Stay No.
It is the difference between the Enter No. and
Exit No.. When the number exceeds the
configured value, an alarm will be triggered.
Pass No.
Counts the number of people entering and
exiting the detection area from the direction A.
When the number exceeds the configured value,
an alarm will be triggered.
Inside Number
Set the number of people in the people counting
region. When the people count reaches the
configured value, an alarm will be triggered.
Type
Stay Alarm
Select the Stay Alarm checkbox to enable this
function.
Min Duration
When the stay duration exceeds the configured
value, an alarm is triggered.
Area people
counting
When the alarm is triggered and this state lasts
for repetitive alarm time, the alarm will be
triggered again.
Repeat Alarm Time
0 means repeat alarm function disabled.
Step 7
Set arming periods and alarm linkage action. For details, see "6.5.1.2 Alarm Linkage".
Click + Event Linkage to set the linkage action.
Step 8
Click Apply.
To view alarm information on the alarm subscription tab, you need to subscribe relevant
alarm event. For details, see "6.5.1.3.2 Subscribing Alarm Information".
Results
You can view the counting results on the Live page.
●For People Counting rule, the entry and exit numbers are displayed.
●For Area People Counting rule, the inside number is displayed.
169