Инструкция IP-камера Tiandy TC-C32XS

Note: The mounting surface of camera must have sufficient bearing capacity.

Installation Diagram of HD Network Zoom IR Gun Camera (without integrated bracket)

Steps:

1. Mark the positions of holes for mounting camera on the wall using an ink pen.

2. Make holes on the marked positions using an electric drill.

3. Drive the expansion rubber plug into the hole.

4. Fasten the wall mounting bracket on the wall with screws.

5. Align the two screws with the screw mounting position of camera, and then tighten them by

turning.

6. Adjust the universal joint of bracket to a proper position and then tighten it.

Note:

(1) Brackets must be purchased separately.

(2) The mounting surface of camera must have sufficient bearing capacity.

32