Инструкция IP-камера Tiandy TC-C32XS

3. Drive the expansion rubber plug into the hole.

4. Fasten the wall mounting bracket on the wall with screws.

5. Take out the camera in the packaging box, align the two screws with the camera screw mounting

position, and then tighten them by turning.

6. Adjust the universal joint of bracket to a proper position and then tighten it.

Note:

(1) Brackets must be purchased separately.

(2) The mounting surface of camera must have sufficient bearing capacity.

3.2.7. HD Network Zoom IR Gun Camera

Installation Diagram of HD Network Zoom IR Gun Camera (with integrated bracket)

Steps:

1. Paste the positioning stickers on the wall.

2. Make holes on the marked positions using an electric drill.

3. Drive the expansion rubber plug into the hole.

4. Fasten the wall mounting bracket on the wall with screws.

5. Adjust the screw, rotate the angle to the target position, and then tighten the screw.

6. Adjust the sunshade back and forth, to avoid blocking video or IR light.

31