Текст страницы
Mount Your Camera
When you finish adding your camera in the Tapo app, you can mount it on a wall or ceiling with the provided mounting template and screws. You can
also mount it on the pole with mounting loops. Follow the steps below to mount your new camera.
Note: The camera is not waterproof when set on a table or shelf. Mount the camera via Option 1-3 when installing outdoors.
Option 1: Wall Mount
3. Mount the Camera
1. Affix the Camera and Bracket
Insert four mounting anchors into
the holes, then use the mounting
screws to affix the camera and
bracket over the anchors.
Route the camera power cord and
Ethernet cable through the
opening of the bracket. Use two
bracket screws to affix the bracket
and camera.
Note: Adjust the antenna vertically
for the best Wi-Fi signal.
2. Drill Holes
Φ=6 mm (15/64 in.)
Stick the mounting template to
the desired mounting place. Drill
four screw holes according to
the template.
8