Текст страницы
6 Troubleshooting
Problem
Cause
Solution
Coffee is delivered too slowly
or a drop at a time.
Coffee powder too fine which
block the water to come out.
Adjust the coffee fineness to
bigger dot during grinder op
eration.
Internal coffee powder outlet
is blocked.
Follow the steps in Cleaning
the coffee powder outlet.
Lack of bean indicator flashes
but there is still a lot of coffee
bean inside the container.
No milk foam out from the ma
chine
The automatic milk frother is
dirty or not assembled or in
stalled correctly
Clean the automatic milk froth
er and make sure it is correctly
assembled or installed.
No milk foam out from the ma
chine
The hole of Milk tube connector
is blocked by milk residues
Refer to section “Daily Cleaning
of the appliance” ,follow “clean
ing the milk container and con
nection milk tube”, Clean the
connector and make sure all
the hole on the connector is
clean, use needle or bristle of
brush to clean the hole.
The milk tube connector not be
cleaned for a long time
The hole of Milk tube connec
tor is blocked by milk residues
which hardly to be cleaned
Soaking the connection milk
tube into warm water for an
hour, follow the “cleaning the
milk container and connection
milk tube” in section “Daily
Cleaning of the appliance”,
keep using frothing milk func
tion to clean until water come
from dispenser smoothly. Use
needle or bristle of brush to
clean the hole
The milk froth is of poor quality
The type of milk used is not
suitable for frothing
Different types of milk result in
different amounts of froth and
different forth qualities. Semi-
skimmed or full-fat cow’s milk
gives good results.
The temperature of the milk is
too high
No milk foam out from the ma
chine
36 / EN
Fully Automatic Coffee Machine / User Manual