Текст страницы
Installing the switch
The rackmount hangers are not for sustaining the weight of the switch, and they are for
fixing the switch. The carrier is necessary for sustaining the switch.
2.1.2 Installing the Switch on the Working Desk
You can place the switch on the clean, stable, and grounded working desk.
To install the switch on the working desk, do the following:
Place the switch upside down carefully, and clean the groove on the switch baseboard with
the soft cloth. Make sure there is no oil or dust.
Tear off the sticker on the surface of the supplied foot pad, and paste the foot pad on the
groove on the switch baseboard.
Turn the switch over, and place the switch on the working desk right side up.
Connecting the Cables
2.2.1 Connecting the Configuration Cable
Connecting the configuration cable
Installing the Device 4