Текст страницы
Unmanaged Rackmountable Switches
Chapter 3 Connection
3.1
Ethernet Port
Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows.
Figure 3-1
Connecting the RJ45 Port
RJ45 Port
RJ45 Cable
3.2
SFP Port
The following figure demonstrates the connection of SFP port to an SFP module.
Figure 3-2
Inserting the SFP Module
SFP Slot
SFP Module
Note:
MS118CP/MS120GP/MS126CP/MS128GP has 2 SFP ports which support 1000 Mbps SFP
module connection.
3.3
Verify Installation
After completing the installation, verify the following items:
■There should be 5 to 10 cm of clearance around the device for ventilation and make sure the air flow is
adequate.
■The voltage of the power supply meets the requirement of the input voltage of the device.
■The power socket, device and rack are well grounded.
■The device is correctly connected to other network devices.
Connection
9