Текст страницы
Air Compressor
ing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
►Store idle power tools out of the reach
cord for possible damage, the moving
parts of the product for their function
ing.
►When disconnecting the product from
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
►Maintain power tools. Check for mis
the electrical network, BE sure to turn
off the product with a switch first. Do
not turn off the compressor by simply
removing the plug from the outlet: the
pressure in the discharge line will not
be drained and the next time you con
nect to the mains, this will cause the
compressor to start working “under
load”.
►Always remove the plug from the wall
outlet after finishing work.
►In case of damage to parts of the prod
alignment or binding of moving parts,
breakage of parts and any other con
dition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power
tools.
►Keep cutting tools sharp and clean.
uct (especially the cylinder), do not per
form repair (welding, mechanical) work
on them yourself. Contact the service
center.
►Do not transport the compressor with
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
►Use the power tool, accessories and
the receiver under pressure.
►Individual parts of the product get hot
during operation and touching them
may cause burns.
►Use only grounded electrical outlets
when connecting the product to the
mains power supply to avoid electric
shock.
►During operation, the product auto
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for oper
ations different from those intended could
result in a hazardous situation.
Safety instruction of air compres
sor
Compressed air is a source of great ener
gy and therefore potentially dangerous. To
avoid accidents:
►Do not direct the compressed air jet at
matically turns on and off when the
set pressure values are reached. In the
event of an unexpected loss of voltage and
its subsequent recovery, the compressor
resumes operation automatically.
►The use of the product in industrial and
people, animals or your own body;
►Do not put your hands under the fitting
or tool in order to check the presence
of air flow;
►Do not perform any work to repair the
industrial volumes, in conditions of
high intensity of work and super heavy
loads, reduces its service life.
Product Description and Specifi
cations
product or replace the failed parts with
out disconnecting it from the mains and
completely draining the pressure from
the cylinder;
►Do not use damaged hoses or replace
ment tools that allow air leakage;
►Be careful! With a sharp expansion, the
air cools to subzero temperatures – you
can both harm yourself and damage
the objects around you and the product
itself.
►This product is designed to compress
air only. Do not use it to compress oth
er working bodies (gases, liquids).
►Before starting work, inspect and visu
ally check the product and the power
Read all safety warnings and all
instructions.Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious injury.
Intended Use
The electric belt oil air compressor is designed
to generate, store and supply compressed air
for use in units that use the energy of com
pressed air (spray guns, pneumatic wrench
es, tire inflation devices and other pneumatic
tools).
Product Features
The numbering of the components shown re
fers to the representation of the power tool on
4