Текст страницы
Assemble as shown in illustration 24
23 Blend-Xtract 2GO
a
Dispensing lid
b
Bottle
c
Sealing ring
d
Blade assembly
e
Base
Assemble as shown in illustration 23
Hints and Tips
O Note that when the bottle is filled
to max capacity (400ml), this is
approximately two servings.
O For best blending performance
always add ice/frozen ingredients to
the bottle first.
O Once your drink has reached the
desired consistency, you can use the
pulse ‘P’ to ensure all ingredients are
thoroughly blended.
To assemble and use your Roto Food
Cutter
1
Raise the mixer head. Ensure both
outlet covers are fitted.
2 With the attachment body in the
position shown - align the drive tabs
on the end of the attachment with
the corresponding slots in the drive
outlet.
3 Fit the required cone - turn anti-
clockwise to lock in place.
4
Attach the cone retainer - align the
notch with the cut out in the body.
Turn clockwise to lock in position.
5
Fit the mixing bowl or place a
suitable bowl under the outlet.
6
Place the food in the feed tube and
use MAX speed. Gently push down
with the pusher.
Note: the pusher will only fit one way.
O If you do not intend to consume
your drink immediately, keep it
refrigerated.
O Ensure your drink is thin enough to
be able to drink from the dispensing
lid. To make a thinner drink add more
liquid.
O After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
O Some drinks may separate on
standing, therefore it is best to drink
them straight away. Separated drinks
should be stirred before drinking.
O When the dispensing lid is fitted
always keep the bottle upright.
24 Roto Food Cutter
a
Pusher
b
Body and feed tube
c
Cutting cone
c1 slicing
c2 coarse grate
c3 fine grate
d
Guard/cone retainer
14