Текст страницы
Addition/subtraction
Switch on/off the device
To switch on the device short press .
To switch off the device press and hold during 1 second.
Short press
Turn on laser beam.
Aim the product at measured object.
Measuring unit
EN
Laser distance meter
- Display
- Keyboard
- A hole for the strap
- End-piece
- Tripod thread 1/4’’
- Mini-USB connector for charging
Short press and simultaneously to enter
DE
Short press
service settings. Short press button to select
Functions of buttons
Take first measurement.
Measuring result appears in the main
line.
INTENDED USE
Laser distance meters Vector 60 and Vector 80 are intended to
measure distance, to calculate area and volume of measured
objects, perform calculations by tilt sensor* and Pythagoras’
Theorem, point to point measurements*, store results of
measurement/calculation in memory and also transmit via
Bluetooth. The product is suitable for use at both indoor and
outdoor building areas.
*-Vector 80 only.
RU
required measuring unit – m/ft/in (meters/feet/inches).
Лазерный дальномер
Laser-Entfernungsmesser
- Height
Button
Short press
Long press
Short press to confirm and return to single distance
Short press
The symbol of addition/subtraction
will appear on the display.
- Length 1
measurement mode.
Switch on the
device
Short press
Reference point
Turn on laser beam. 1st measuring
result moves to the line 2 on the
display.
- Area
Press and hold button during 1 second to select
DELIVERY PACKAGE
The delivery package includes:
1. Laser distance meter – 1pc.
2. Carry pouch with a strap - 1 pc.
3. User manual - 1 pc.
5. USB charger - 1 pc.
Continuous
measurement
(tracking)
Switch on laser
beam
Short press
Take 2nd measurement.
the reference point. Appropriate indicator will appear on the
TECHNICAL SPECIFICATIONS
display.
Single distance
measurement
Vector 60
Vector 80
Short press
Make the 3rd measurement
(length 2)
Area
Measuring range*
0.05–60 m
0.05–80 m
Wall surface*
Measuring accuracy **
± 1.5 mm
Volume
Smallest unit displayed
1 mm
Front Tripod Rear End-piece
(default)
Tilt sensor*
- 1st measurement
Display backlight
+
Memory
Pythagoras 1
Reference point
Front, rear, tripod, end-piece
- Height
Measurements
- 2nd measurement
Pythagoras 2
- Length 2
Single distance measurement
Continuous
measurement (tracking)
+
Pythagoras 3
- result of addition /subtraction
Max./min. value
+
Point to point*
Short press
The device will switch on.
- Wall area
Addition/subtraction
+
Addition/
subtraction
Select reference
point
Area/ volume
+
Short press
To do addition/subtraction of more than 2 measurements
short press and perform the above mentioned
operations required number of times.
Laser beam will switch on.
Point the laser beam at the object of
measurement.
Calculations by
Pythagoras’ Theorem
+
Stop measurement/
clear/exit the mode
Switch off the
device
Short press
Exit the mode.
Bluetooth
+
Short press
Make a single distance
measurement.
3rd, 4th, 5th etc. measurements can be done unlimited
number of times. Each new wall surface is added to
previously calculated wall area result.
Wall surface
-
+
Vector 60/80
Short press
Exit wall area calculation mode.
+
CALCULATIONS
Select measuring
unit
Area
Calculation of horizontal
distance by tilt sensor
-
+
Volume
simultaneously
Point to point
measurement
-
+
EN User manual 1-2
DE Bedienungsanleitung 3-4
RU Руководство пользователя 5-6
Symbol will appear on the
*-Vector 80 only
Symbol will appear on the
display. Laser beam will be on.
Short
press
1 time.
display. Laser beam will be on.
Memory
up to 30 values
Short press
2 times.
(Vector 60)
Display
5
11
6
7
Laser
Class II, 635 nm, <1 mW
Short press
Make the 1st measurement (length).
Laser distance meter
Operating temperature
0 °С ... +40 °С
Short press
3 times.
(Vector 80)
Storage temperature
–20 °С ... +60 °С
EN
Short press
Vector 60/80
4
- Measurement result
Short press
Make
the
first
measurement
(length).
Dust and water
protection
IP54
Short press
Make the 2nd measurement (width).
Make the 2nd measurement (width).
Area
(length
and
width
multiplication) will be calculated
and appear in the main line on the
display.
User manual
3
Power supply
3.7 V 850 mAh Li-ion
rechargeable battery
Short press
Delete the last measurement result.
8
Dimensions
119*46*28 mm
Continuous distance measurement (Tracking)
Weight
0.1 kg
2
Congratulations on your purchase of laser distance meter
Vector 60/80 CONDTROL.
Safety instructions can be found in the end of this user manual
and should be carefully read before you use the product for
the first time.
9
- Length
Press and hold
during
2 seconds
- Length
10
8
- Width
- Width
The
device
will
start
making
measurements one after another,
showing
current
measurement
result in the main line, maximal value
in the 1st line, minimal value in the
2nd line.
1
- Area
- Area
* Use a reflective plate to increase the measurement range
during daylight or if the target has poor reflection properties.
** Accuracy can decrease in unfavorable conditions, such as
intense sunshine or when measurements are made against
glossy or transparent surfaces, moving objects, objects with
rough surface.
In unfavourable conditions or when measured distance is over
100 m themaximum permissible accuracy is calculated in the
following way:
- Angle value
Short press
Make the 3rd measurement (height).
± (Y + 0,25хDх10-3) mm, where
D (mm) - measured distance
Y (mm) - permissible accuracy according to technical data.
SAFETY REGULATIONS
The user manual should be read carefully before you use the
product for the first time. Unintended use of the product can
be dangerous for human’s health and cause serious injury.
Keep this user manual. If the product is given to somebody for
temporary use, be sure to enclose user manual to it.
- Do not misuse the product
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the
product.
The device belongs to laser product class 2 in accordance with
EN60825-1.
Short press
Exit the mode.
PRODUCT DESCRIPTION
- Maximal value
Wall surface (Vector 80 only)
1
Symbol will appear on the
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 635nm
EN60825-1: 2007-03
- Minimal value
display. Laser beam will be on.
Short
press
2 times.
- Width
5
- Current value
- Main line for displaying measuring results
- Additional lines for displaying measuring results
- Indication of tilt angle
- Indication of the mode
- Indication of point to point function
- Indication of Bluetooth
- Indication of battery charge level
- Indication of max/min values
- Indication of reference point
- Indication of measuring unit
- Indication of memory
- Height
Short press
Make the 1st measurement
(height).
OPERATION
- Volume
Short press
Make the 2nd measurement
(length 1).
Battery charging
Charge level is shown on display. Charge the battery when
2
Press or
Stop continuous measurement.
The last measured values are shown
on the display.
4
Short press
Exit the mode.
3
6
symbol appears on the display. Use USB charger delivered
in the set only.
It is not recommended to use the product while charging.
It takes approximately 3 hours to fully charge the batteries.
1
- Do not look into the laser beam or its reflection, with
unprotected eye or through an optical instrument. Do not
point the laser beam at people or animals without the need.
You can dazzle them.
- To protect your eyes close them or look aside.
- It is prohibited to disassemble or repair the product yourself.
Entrust product repair to qualified personnel and use original
spare parts only.
- Do not use the product in explosive environment, close to
flammable materials.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash
it immediately with soap and water. In case of contact with
eyes, flush with clean water during 10 minutes and consult the
doctor.