Инструкция ледогенератор BRAYER BR6301

Страница 10 (стр. 10 из 52)

Бренд: BRAYER

Страница 10 документа Ледогенератор BRAYER BR6301. Раздел: Ледогенераторы. Бренд: BRAYER.

Текст страницы

10
EN

• It is recommended to change the water in the tank
every 24 hours, otherwise sediment may form in the
water and the ice will become cloudy.
• Clean the ice generator at least once a week.

USING THE ICE GENERATOR

indicator (15) will light up in red. Open the lid (2) of
the ice generator and pull out the basket (18) by
holding the handles (19), use the scoop (20) to empty
the ice from the basket (18) and place the basket
(18) into place.
Note: the infrared diode (9) and photodetector (13)
monitor the filling process of the basket (18), so the
diode (9) and photodetector (13) must always be kept
clean.

• Open the lid (2) of the ice generator and pull out the
basket (18) by holding the handles (19).
• Pour water into the tank (8), without exceeding the
maximum water level (12) «MAX».
• Place the basket (18) into place, close the lid (2).
• Plug the power cord into the mains socket; the ice
generator will go into standby mode and the «Ice»
indicator (18) will flash.
• Switch the ice generator on by pressing the On/Off
button «On/Off» (17), the ice generator will go into
ice freezing mode and the «Ice» indicator (18) will
glow continuously.
• The ice freezing cycle lasts approximately 7-15
minutes depending on the temperature of the water
and the environment.
Note: when the ice generator is switched on, the
compressor is switched on, so the operation of the
ice generator is accompanied by a certain noise (by
analogy with a household refrigerator).

• If the «Basket is full» indicator (15) lights up red,
you can open the lid (2), remove the basket (18)
and shake it slightly; if there is free space in it, put
the basket (18) into place, close the lid (2), the ice
generator will be switched on and the basket (18) will
be filled with ice.
• When the water in the tank (8) runs out, the «Add
water» indicator (16) will light up red.
• Before pouring water into the tank (8), switch off the
ice generator by pressing the On/Off button «On/Off»
(17), unplug the power cord from the mains socket,
open the lid (2), pull out the basket (18) by holding
the handles (19), pour water into the tank (8), without
exceeding the maximum water level (12) «MAX»,
put the basket (18) into place, close the lid (2). Plug
the power cord into the mains socket and switch on
the ice generator by pressing the On/Off button «On/
Off» (17).
Note: Unless you unplug the power cord from the mains
socket and switch the ice generator on again, the ice
generator will begin making ice after 5 minutes.

• To stop the ice generator, press the On/Off button
«On/Off» (17) again, the «Ice» indicator (18) will
flash.
• When the basket (18) is filled with ice, the ice
generator will stop operating and the «Basket Full»

instr BR6301.indd 10
instr BR6301.indd 10
06.05.2024 11:05:09
06.05.2024 11:05:09

Бытовая техника / Техника для кухни / Холодильное оборудование / Ледогенераторы

Ледогенератор RAGEX R1801

14 стр.