Текст страницы
2.3
M.2 module installation
NOTE:
• The illustrations only show the installation steps for selected M.2 slots, the steps are the same
for the other M.2 slots.
• Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in
this section.
• If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with the
bundled thermal pad or a thermal pad with a thickness of 1.25mm.
• Supported M.2 type varies per motherboard.
1.
Press the tab downwards on the M.2 Q-Release to release the heatsink.
2.
Pull the heatsink slightly outwards towards the tab, then lift and remove the heatsink.
41