Текст страницы
DIMMB2
DIMMA2
DIMMA1
DIMMA2
DIMMB1
DIMMB2
⚠Important
●The DIMM slots on this motherboard only have a single latch. Please be careful when
installing or removing memory modules to avoid damaging the slots.
●Align the notch on the DDR5 module with the notch on the memory slot to ensure
proper orientation. Do not force the module into the slot; it should slide in easily if
properly aligned.
●To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
●Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Speed to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
●It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
●The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.
●Please refer to www.msi.com for more information on compatible memory.
31