Текст страницы
JOC_FS1: Safe Boot Jumper
This jumper is used for Safe Boot. When this jumper is enabled, the system will boot
with default settings and lower PCIe (from CPU) mode.
Normal (default)
Enabled
Boot with the saved
BIOS settings.
Apply the BIOS default
settings and lower PCIe
(from CPU) mode for
Safe Boot
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/
Reset BIOS
Resetting BIOS to default values
1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.
45