Текст страницы
Resetting BIOS
If you encounter certain issues with your computer, restoring the default BIOS settings
might help. You can reset the BIOS settings using the following methods:
●Enter the BIOS setup and press F6 to load the optimized defaults.
●Use the Clear CMOS jumper on the motherboard to reset the BIOS.
●If your motherboard has a Clear CMOS button on the rear I/O panel, press it to reset
the BIOS.
⚠Important
Ensure the computer is powered off before clearing the CMOS data. For more details,
refer to the Clear CMOS jumper/button section in the manual.
Updating BIOS
Updating BIOS with M-FLASH
Before starting the M-Flash process, make sure you have:
●A USB flash drive with a capacity of 32GB or less that is formatted to FAT32. ⚠Important
M-Flash only supports FAT32 format, and the USB flash drive should not exceed 32GB.
●A computer with internet access.
Please follow the steps below to update BIOS:
1. Download the latest BIOS file from the MSI website that matches your
motherboard model, and save it to the USB flash drive.
2. If your motherboard has a Multi-BIOS switch, switch to the target BIOS ROM.
3. Insert the USB flash drive into your motherboard’s USB port.
4. Enter flash mode by either:
●Rebooting and pressing Ctrl + F5 during POST, then clicking Yes to reboot the
system.
●Rebooting and pressing Del during POST to enter BIOS, then clicking the M-FLASH
button and clicking Yes to reboot.
5. Select a BIOS file from the M-FLASH File menu and press Enter.
6. When prompted by a File Check message, click Yes to start the BIOS update.
Once the update reaches 100%, the system will reboot automatically.
59