Текст страницы
Important Safeguard and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and
prevention of property damage. Read carefully before using the device, and comply with the
guidelines when using it.
Installation Requirements
●Do not connect the power adapter to the device while the adapter is powered on.
●Do not connect the device to two or more kinds of power supplies, to avoid damage to the
device.
●Please follow the electrical requirements to power the device.
Following are the requirements for selecting a power adapter.
○The power supply must conform to the requirements of IEC 60950-1 and IEC 62368-1
standards.
○The voltage must meet the SELV (Safety Extra Low Voltage) requirements and not exceed
ES-1 standards.
○When the power of the device does not exceed 100 W, the power supply must meet LPS
requirements and be no higher than PS2.
We recommend using the power adapter provided with the device.
When selecting the power adapter, the power supply requirements (such as rated voltage)
are subject to the device label.
●Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
●Do not place the device in a place exposed to sunlight or near heat sources.
●Keep the device away from dampness, dust, and soot.
●Install the device on a stable surface to prevent it from falling.
●Install the device in a well-ventilated place, and do not block its ventilation.
●Use an adapter or cabinet power supply provided by the manufacturer.
●Use the power cords that are recommended for the region and conform to the rated power
specifications.
●The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective earthing.
●The device must be installed at a height of 2 meters or below.
Operation Requirements
Battery Pack Precautions
Preventive measures (including but not limited to):
●Do not transport, store or use the batteries in high altitudes with low pressure and
environments with extremely high and low temperatures.
III