Текст страницы
3.6.5 Mode Setting
Set the area status under different modes.
Area mode can only be set when the system is disarmed.
Procedure
Step 1
Select Setting >
.
Step 2
Select any or the 4 arming modes.
●Home: Arm the system when you are inside the area of the alarm system.
●Away: Arm the system when you leave the area of the alarm system.
●Sleep: Arm the system when you are in the sleep time.
●Custom: Arm the system based on your customized needs.
Step 3
Turn on or turn off the area you selected to enable or disable the arm mode.
●Multiple areas can be added into one arm mode at the same time.
●One area can be added into different modes.
Figure 3-38 Mode setting area
Step 4
(Optional) Tap
to page down the screen to Wireless Zone. Turn on the area to add
it to the arm mode, or turn off the area to remove it from the arm mode.
●For devices with the wireless function, the wireless zone can be configured after you
enable Wireless Alarm in General Setting > Other.
●Multiple areas can be added into one arm mode at the same time.
●One area can be added into different modes.
66