Текст страницы
C4 Lay-Flat Cleaning
C6 Water Level Alerts
Ensure that the clean tank has sufficient
water before use. When the dirty tank is full
during use, the vacuum cleaner will provide
audio and visual alerts. In this case, empty
the dirty tank prior to resuming cleaning.
C6-1—Light stripe in red: Error
The vacuum cleaner can be laid flat to clean
under furniture and appliances. To lay it flat
on the floor, lower the handle while using
the machine. The available capacity of the
dirty tank decreases during lay-flat cleaning.
Therefore, it is recommended to empty the
dirty tank before cleaning under furniture
and appliances.
Notes:
• Make sure that the clean tank and dirty tank are in place
for optimum self-cleaning and drying performance.
• The product is equipped with a built-in high-
performance lithium-ion rechargeable battery pack.
To maintain battery performance, keep the product
charged during normal use.
• Always place the vacuum cleaner back on the charging
dock after use to avoid leaving water stains on the floor.
• If the Charge & Sleep mode is disabled and the machine
is shut down, ensure the machine is on the charging
dock, press the
button to turn it on, and then start
self-cleaning.
C7 Emptying the Dirty Tank
Always lay the vacuum cleaner flat with the
buttons on the handle facing up.
Note:
C9 Drying
C7-1—Hold the dirty tank handle, press
the release button, and tilt the tank
backward to remove it.
C5 Mode Switching
C7-2—Gently pull out the tank cover, and
empty the dirty tank.
When self-cleaning is completed, drying will
start automatically. During charging, press
and hold the
button for 2 seconds to
switch the drying mode. Press and hold the
Press the
button to switch between AUTO,
MAX, ECO, and Sponge modes. The screen
will display the icon of the current mode.
button for 2 seconds to start/stop drying.
Notes:
Wait for Orders and Power off
C7-3—Reinstall the tank cover. Insert the
bottom of the tank to the machine
body and tilt the tank towards the
machine until it clicks into place.
C8 Charging and Self-Cleaning
1. Press the
button during cleaning to
pause the vacuum cleaner. It is now waiting
for orders.
2. Lock the vacuum cleaner when it is waiting
for orders so that it can stand upright on
the floor.
1. Lock the vacuum cleaner when it is waiting
for orders and place it on the charging
dock. Charging starts when you hear
the "Charging started. Please start self-
cleaning." voice massage.
• Drying will automatically start after self-cleaning
completes. Do not often start drying manually.
• Self-cleaning and drying are available only when the
vacuum cleaner is being charged and with a high
battery level. Different drying modes require different
power levels. When the vacuum cleaner is set to
Fast Drying mode but the battery level is low, it will
automatically switch to Quiet Drying mode.
• Stay away from the drying air outlets during drying.
• If the Charge & Sleep mode is disabled and the
machine is shut down, ensure the machine is on the
charging dock, press the
button to turn it on, and
then start drying.
2. Press the
button to start/pause smart
self-cleaning.
3. If the vacuum cleaner is left idle for 5
minutes when it is waiting for orders, it
will automatically turn off. To manually
turn it off, press and hold the
button
for 2 seconds when it is waiting for orders.
Enable/Disable Charge & Sleep
Mode
3. After self-cleaning and drying are completed,
follow the voice message and empty the dirty
tank timely to prevent odors.
The Charge & Sleep mode is disabled by
default. To enable or disable it, press the
008