Текст страницы
12
EN
VEGETABLE SLICER
MOTOR OVERHEATING PROTECTION
• In case of overheating of the motor, the automatic
thermal switch will trip and the meat grinder will
switch off.
• Switch the meat grinder off by setting the operation
mode switch (1) to the position “OFF”, and unplug
the unit.
• Let the meat grinder cool down for approximately
40-60 minutes (the cooling time of the electric motor
depends on the room temperature).
• Connect the power plug to the mains socket and
switch the meat grinder on by setting the operation
mode switch (1) to the position “1 or 2”. If the meat
grinder does not switch on, it may mean that there
are other damages in the unit. In this case apply
to a service center for testing or repairing the meat
grinder.
• To avoid the motor overheating, do not overload the
meat grinder and do not put excessive efforts when
pushing meat or other foodstuffs.
CLEANING AND CARE
• After finishing work, switch the meat grinder off
(see the section «Switching off the meat grinder»),
disconnect the power plug from the mains socket,
then proceed to disassemble it.
• Wash all the removable parts which were used for
operation with warm water and neutral detergent,
rinse and dry.
• The package includes attachments ( 20, 21) for
chopping fruits or vegetables and the slicer (19) for
slicing fruits or vegetables.
• Insert the vegetable slicer attachment (18) into the
slot (4), turn the vegetable slicer attachment (18)
counterclockwise until it locks.
• Insert one of the attachments (19, 20, 21) into the
vegetable slicer attachment (18) (Fig. 16).
• Install a suitable container under the vegetable slicer
attachment (18).
• Insert the power plug into the mains socket.
• Switch the meat grinder on (see the section
«Switching on the meat grinder»).
• During operation, use only the pusher (17) supplied
with the unit. Do not apply excessive effort while
pushing fruits or vegetables. Do not push fruits or
vegetables with your hands or any other objects.
• After finishing work, switch the meat grinder off
(see the section «Switching off the meat grinder»),
disconnect the power plug from the mains socket,
then proceed to remove the vegetable slicer
attachment (18).
• To remove the vegetable slicer (18), press the lock
button (3), turn the vegetable slicer attachment (18)
clockwise and remove it.
• Remove the installed attachment (19, 20, 21) from
the vegetable slicer attachment (18).
• Wash the removable parts in warm water with a
neutral detergent. Rinse and dry.