Текст страницы
MEAT GRINDER
during storage.
•
It is recommended not to leave the meat grinder on for longer than the processing of
products requires.
•
Keep pets away from the appliance. Make sure that they do not damage the device
or the power cord, and also do not cut themselves on sharp knives.
•
Turn off the meat grinder before changing accessories and attachments. They can be
attached or removed from the meat grinder only after the electric motor is completely
stopped. Do not touch the moving parts of the device with your fingers, spoons and
spatulas during operation, this may cause it to break. In the event of a breakdown, do
not use a faulty device or attachments.
•
To avoid injury, keep your fingers, hair and clothing at a safe distance from moving
parts of the meat grinder. In no case do not take the knife located on the leg of the
meat grinder, as well as the blades of the chopper nozzle.
•
Be careful when mixing hot products and liquids, so as not to get burned from possible
splashes. Before processing hot products with a meat grinder, they should be cooled
to at least 80°C.
•
Do not use the device for grinding coffee, cereals, beans and other particularly hard
products.
•
Do not allow fats and oils (including vegetable oils) to get on the body and plastic
parts of the device to avoid their damage. Do not heat the plastic parts.
•
Keep the meat grinder and its accessories clean. Do not use sharp metal scrapers,
caustic and abrasive cleaning agents, as they can scratch the surfaces of the device
and knives. Be careful when washing knives, in no case do not clean them with your
bare hand, use a brush for this.
IMPORTANT! The working time of the meat grinder at maximum speed should
not exceed 3 minuts. It is necessary to interrupt the work for 1 minute after two
or three consecutive working cycles. The time of using the meat grinder without
loading should be no more than 1 minute.
ATTENTION! The meat grinder knives are very sharp, be careful when handling
them. Before disassembling the meat grinder, make sure that it is disconnected
from the power supply!
21
USER GUIDE