Текст страницы
Li-Ion batteries
the need for replacement. It should be taken into ac
count that the battery 12 may discharge faster if the
works take place in the temperature below 0°С.
•• In case of long time storage without use, it is recom
mended to store the battery 12 at room temperature, it
should be charged to 50%.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi
tation of the power tool is to keep it clean. Regularly
flush the power tool with compressed air thought the
ventilation slots 9.
After-sales service and application service
The contained Li-Ion batteries are subject to the Dan
gerous Goods Legislation requirements. The user can
transport the batteries by road without further require
ments.
When being transported by third parties (e.g.: air trans
port or forwarding agency), special requirements on
packaging and labelling must be observed. For prepa
ration of the item being shipped, consulting an expert
for hazardous material is required.
Dispatch batteries only when the housing is undam
aged. Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around
in the packaging. Please also observe possibly more
detailed national regulations.
Environmental protection
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com.
Recycle raw materials instead of dispos
ing as waste.
Transportation of the power tools
•• Categorically not to drop any mechanical impact on
the packaging during transport.
•• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp
ing packaging.
Power tool, accessories and packaging
should be sorted for environment-friendly
recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper man
ufactured without chlorine.
31
English
The manufacturer reserves the possibility to introduce changes.