Текст страницы
Getting started
Unpacking
Take the device out of the packaging, inspect it, and make sure it is not damaged.
In order to receive tech support from the vendor, all damage resulting from
transportation and handling must be acknowledged in writing by the freight
company
If the device has been stored or transported at an air temperature below +10 °C,
leave it indoors in a packing bag for two hours until it warms up to room temperature.
This is necessary to prevent the formation of condensation, damage to plastic parts
during installation, and malfunction
Before using the device, carefully study the operation manual, warranty terms, and
check the completeness and external appearance.
Electrical Connection
You must choose a location for the device before mounting — please refer to the
instructions on the mounting template.
Select the type of electrical connection: open or hidden.
A power line with the following parameters should be brought to the device's
location: single-phase, 230 V, 50 Hz with protective earth. The permissible power
for the selected power line is at least 2 kW, provided that no other device is used in
parallel on the same power line.
Protective grounding is a mandatory requirement for operating the device.
38