Текст страницы
3. Intelligent Features
4. Battery Charging and Power Saving
5. Wearing Your Headphones
3.1 Environmental Controls
Wearing your headphones correctly will help ensure
the best possible experience. See Diagram 5.
ENGLISH
Active Noise Cancellation
1. Identify the left and right earpieces by finding
Your Px7 S2e comes with the battery partially
charged and may be used immediately. For best
practice we recommend you fully charge the
headphones before first use. Please allow up to 2
hours to fully charge. The headphones can be used
while charging.
the identification legends located on the interior
of each earpiece.
To charge:
2. Wear the headphones accordingly with
Noise cancellation is a series of advanced
technologies that aids in removing undesired noise
from the surrounding environment. The Px7 S2e
headphones use built-in microphones to pick up and
cancel out ambient sound for a more comfortable
listening experience.
1. Use the supplied USB-C cable and connect
the headband adjusted so that they rest
comfortably on your head.
one end to a wall charger or powered
computer port.
Note: Noise cancellation requires a good seal
between the headphones and your head for
optimal performance.
2. Connect the other end of the cable to the
USB-C socket on the headphone’s right
earpiece.
Note: Wearing glasses that distort the profile
of your ears may interfere with headphone
performance. Similarly, hair trapped between your
ears and the headphone earpieces may interfere
with the wear sensor performance.
Ambient Pass-Through
Note: During charging, the headphone indicator
will flash green. When fully charged, the indicator
will remain illuminated. See section 2.3 for status
indicator details.
Px7 S2e also features an ambient “Pass-Through”
mode, which allows in some external sound from
the surrounding environment, allowing safety
announcements or conversations to be heard
without taking the headphones off.
By default, the Quick Action button on the left
earpiece will cycle through the following modes,
but the button can be customised from the
Bowers & Wilkins Music app. See Diagram 2 for
button location.
• Noise Cancelling On
• Pass-Through On
Diagram 3
• Noise Cancelling and Pass-Through Off
Wear sensor location
3.2 Voice Assistance
Your connected device’s voice assistant can be
assigned to the Quick Action button on the left
earpiece from the Bowers & Wilkins Music app.
See Diagram 2 for button locations and section
8.2 on using the Bowers & Wilkins Music app.
3.3 Wear Sensors
Power Saving
Diagram 4
USB-C cable connection
Px7 S2e incorporates our latest enhanced wear
detection sensors in both earpieces (see Diagram 3),
enabling intelligent battery conservation by pausing
media playback and entering low power standby
mode when removed from the head. When worn
again, Px7 S2e automatically wakes and connects to
the last connected Bluetooth device.
Playback Control
During media playback, Px7 S2e will automatically
pause when either earpiece is lifted from the ear.
If playback has been paused, placing the earpiece
back on the ear will resume playback.
The standby timer and wear sensor features can be
adjusted from the Bowers & Wilkins Music app.
Note: Take care when wearing your headphones;
hair or accessories trapped between your ears
and the earpieces, or wearing glasses that distort
the profile of your ears, may interfere with the
performance of the wear sensors.
Diagram 5
Wearing your headphones
4