Текст страницы
Troubleshooting
You can rectify minor faults yourself with the help of the
following overview.
If in doubt, please consult the authorized customer ser-
vice.
Appliance does not vacuum
Use a commerically available soft household sponge to
clean the filter to avoid damaging the coated fins.
Illustration
The individual fins of the intermediate filter can be
cleaned under running water using the sponge.
Allow the filter to dry completely.
With normal use, replace the intermediate filter at
least every 12 months, if necessary, it can be re-
placed sooner.
Note: The intermediate filter must be disposed off
as residual waste.
Power supply is interrupted
Remove the mains plug, check the connecting ca-
ble and the mains plug for damage.
Cleaning the appliance and accessories
Weak/diminishing suction power
Forgot the baffle plate or not inserted correctly
Reinsert the baffle plate correctly.
(see: FILLING THE WATER FILTER RESER-
VOIR)
Intermediate filter missing or not inserted correctly
Illustration
Suction hose and handle can be disassembled for
cleaning.
Check the accessories for obstructions and clean if
necessary. Do not use water to clean the floor noz-
zle.
Check the intermediate filter.
Clean the turbo floor nozzle
Intermediate filter is dirty
Cut hair that is entangled in the roller brush along the
cutting edge with a pair of scissors, and vacuum them
off using the crevice nozzle.
Wash the filter, install new intermediate filter if re-
quired.
(see: CARE, MAINTENANCE)
Change HEPA filter
Intermediate filter is wet
Let the intermediate filter dry or install new dry filter.
(see: CARE, MAINTENANCE)
Strong foam generation in the water filter reservoir
Replace the water and add 1 to 2 capfuls of Foam-
Stop. Check the intermediate filter for moisture. If
necessary, clean the damp filter under running wa-
ter and allow it to dry afterwards or install new filter.
Too little or too much water in the water filter
reservoir
Check the MIN / MAX marks on the reservoir.
Note: In order to ensure an optimised cleaning perfor-
mance and function of the appliance, this filter must be
changed at least every 12 months. Replace sooner if
damaged or extremely dirty.
Caution
Do not rinse out the HEPA filter!
Remove the outgoing air flap.
Illustration
Remove the HEPA filter.
Insert a new HEPA filter so that it "CLICKS" into
place.
Reinstall the lid so it "CLICKS" into place.
HEPA filter is soiled
Technical specifications
Replace the HEPA filter.
(see: CARE, MAINTENANCE)
Kärcher
DS 6
Accessory is blocked
Nominal voltage
1~50-60 Hz
220-240
V
Remove the blockage.
(see: CARE, MAINTENANCE)
False air slide at the handle is open
Fill capacity of the water filter
reservoir
2.0
l
Weight (without accessories)
7.5
kg
Close the false air slide.
(see: WORKING WITH THE FLOOR NOZZLE)
Nominal width, accessories
35
mm
Appliance flap does not close
Eco design as per 666/2013
The cover of the water filter is not properly installed
Sound power level LWA
80
dB(A)
Rated power input
650
W
Properly install the cover of the water filter contain-
er.
The water filter is not properly installed
Subject to technical modifications!
Remove the water filter and correctly insert it into
the appliance.
(see: FILLING THE WATER FILTER RESER-
VOIR)
– 8
13
EN