Текст страницы
Order of work
1. The vacuum cleaner can be carried by the handle (Figure 9).
2. Adjust the power control regulator to MIN before connecting the vacuum cleaner to the outlet.
- Pull out the power cord from the vacuum cleaner and plug the power plug into the wall outlet.
- Switch on the vacuum cleaner by pressing the on/off button on the top cover (Figure 10).
- If necessary, stop cleaning for a short time, turn off the vacuum cleaner (Figure 10) and
unplug the cord, rewind the cord (Figure 11) and insert the brush holder into a parking position,
placing the tube in a convenient position (Figure 12).
5. Suction power can be adjusted by:
- bypass valve on the handle (Figure 8);
- the electronic suction power regulator on the vacuum cleaner (Figure 13).
WARNING: Risk of electric shock! If you see a red mark at the end of the power cord,
rewind the power cord by pressing the rewind button. Pull the power cord up to the yellow
mark (Figure 11).
Note: During cleaning, the bypass valve (Figure 9) must be completely closed. You can
quickly reduce suction power to release objects (e.g. curtains) that have been vacuumed
inside.
VCC0220 / VCB0316 / VCB/C0120
ENGLISH
Figure 8
VCC0220
VCB0316
VCB/С0120
Figure 9
47