Текст страницы
Solid green
Noise cancellation is enabled by
pressing the receiver’s NC button
once
Press and hold the receiver's NC
button for 12 seconds to restore
Blinks red slowly for 5 seconds (then
the transmitter shuts down)
Low battery
Blinks red quickly
Charging
Solid red
Fully charged in startup state
Lighting effect returns to original
working state
Fully charged in shutdown state
Solid blue
Note: When it is turned on and not paired with the receiver, the transmitter will
automatically shut down after 10 minutes.
⑤ Volume + / - Button
A short press of the + or - button will light up the volume indicators, showing the
current volume level. Press the + or - button again to adjust the microphone gain,
ranging from level 1 to 4, and the volume indicators will display the adjusted
volume. If the volume is still low, you can adjust the RX output volume via the
APP.
⑥ Power Button
• Press and hold it for 2 seconds to power on or off the transmitter.
• When the receiver is connected to a mobile device, and the device is on the
video shooting page, press the transmitter’s power button once to start or stop
recording. Note that only mobile devices where the volume button can be used
to take a photo or start and stop a video are supported.
• Double press this button to mute or unmute the transmitter’s microphone.
⑦ Charging Contacts
Charging will begin when the charging contacts of the transmitter connect to the
charging contacts of the charging case. When the transmitter is fully charged, its
status indicator will turn solid blue and automatically turn off after 60 seconds.
⑧USB-C Data Port
For connecting to a computer for upgrades. This port can also be used to charge
the transmitter.
⑨ Belt Clip
Attach the transmitter to clothing using the belt clip or using with the included
magnet.
⑩ Fur Windshield
04