Текст страницы
EN
EN
Preparing Your Home
Before Use
3. Charge the Robot
1. Place the Base Station and Connect to an
Electrical Outlet
When placing the robot, align the charging contacts at the bottom of the
robot with the charging contacts of the base station, and the robot will
automatically turn on and start charging.
Place the base station in a location that is as open as possible with a good
Wi-Fi signal. Leave enough space as shown in the figure and remove any
objects in the shaded area. Insert the power cord into the base station and
plug it into the socket.
After the robot is fully charged, the status indicators on the robot and the
base station will remain lit for 10 minutes and then dim.
＞0.5 m
＞0.5 m
Before cleaning, place a physical barrier at the edge of the stairs to
ensure the secure and smooth operations of the robot.
＞1.5 m
Before cleaning, please move away unstable, fragile, valuable or
dangerous items, and clean up cables, cloths, toys, hard objects and sharp
objects on the ground to avoid being entangled, scratched or knocked over
by the robot and causing losses.
Firmly insert the power cord
until the indicator turns on.
Note:
Note: It is recommended to fully charge your robot before first time use.
· Make sure that no objects might block the signaling area.
· To prevent water stains from wetting wood floors or carpets, placing the
base station on tile floors or marble floors is recommended.
2. Install the Ramp Extension Plate
Open the door of the room to be cleaned, and put the furniture in its
proper place to leave more space.
To prevent the robot from not recognizing areas that need to be cleaned,
do not stand in front of the robot, or in a threshold, hallway, or narrow
places.
Note:
· When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
· Do not vacuum hard objects like stones, steel balls and toy parts, or sharp objects like construction waste, broken glass and nails, otherwise the ground may
be scratched.
09
10