Текст страницы
EN
EN
How to Use
Connecting with Dreamehome App
Pause/Sleep
Turn On/Off
2. Add Device
1. Download Dreamehome App
Scan the QR code on the robot or search "Dreamehome" in the app store to
download and install the app.
Open the Dreamehome App, tap "Scan QR code to connect", and scan the
same QR code on the robot again to add the device. Please follow the
prompts to finish the Wi-Fi connection.
When the robot is running, press any button to pause it.
If the robot is paused for more than 10 minutes, it automatically enters
sleep mode. All indicators on the robot will turn off. Press any button on
the robot, or use the app to wake up the robot.
Note:
Press and hold the power button for 3 seconds to turn on the robot. The
power indicator should be illuminated. Place the robot onto the base
station, the robot should turn on automatically and begin charging. To turn
off the robot, move the robot away from the base station and press and
hold the power button for 3 seconds.
· To reset Wi-Fi, repeat step 2 and then follow the prompts to finish the Wi-
Fi connection.
Note: If the robot is paused and placed onto the base station, the current
cleaning process will end.
Fast Mapping
· To disconnect the device from Wi-Fi network, press and hold the Reset
button on the robot for 3 seconds..
Auto Resume Cleaning
QR Code
After configuring the network for the first time, follow the instructions in the
app to quickly create a map. The robot will start mapping without cleaning.
When the robot returns to the base station, the mapping process has been
completed and the map will be saved automatically.
Reset Button
If the battery is too low, the robot will automatically return to the base
station to charge. After charging to the appropriate battery level, it will
resume unfinished cleaning tasks.
Start Cleaning
Wi-Fi Indicator
Note: To use this function, please open it in the app.
Note:
· Blinking slowly:
To be connected
· Only 2.4 GHz Wi-Fi is supported.
Do Not Disturb (DND) Mode
Press the power button to start cleaning after the robot is turned on. The
robot will accurately map out a route, methodically clean along the edges
and walls, then finish by cleaning each room in an S-shaped pattern to
ensure a thorough job.
QR Code
· Blinking quickly:
Connecting
· Due to upgrades in the app software, the actual operations may differ from
the directions in this manual. Please follow the instructions based on the
current app version.
· On: Connected
When the robot is set to Do Not Disturb (DND) mode, the robot will be
prevented from resuming cleaning. DND mode is disabled by default at
the factory. You can use the app to enable DND mode or modify the DND
period. The DND period is 22:00–8:00 by default.
Note:
· It is recommended that the robot set out from the base station before
cleaning. Do not move the base station while the robot is cleaning. This
ensures that the robot returns to base station smoothly.
· After the robot completes the cleaning task and automatically returns to
the base station, the base station will start auto-empty. More settings can
be operated on the app.
Note:
· The scheduled cleaning tasks will be performed as usual during the DND
period.
· The robot will resume cleanup where it left off after the DND period
expires.
11
12