Текст страницы
EN EN Connecting with Dreamehome App
How to Use
2. Add Device
Auto Resume Cleaning
1. Download the Dreamehome App
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
If the battery is too low, the robot will automatically return to the charging
dock to charge. After charging to the appropriate battery level, it will resume
unfinished cleaning tasks.
Open the Dreamehome app, tap "Scan QR code to connect", and scan the
same QR code on the robot again to add the device. Please follow the prompts
to finish the Wi-Fi connection.
Note: To use this function, please open it in the App.
Turn On/Off
Press and hold the power button for 3 seconds to turn on the robot. The
power indicator should be illuminated. Place the robot onto the charging
dock, the robot should turn on automatically and begin charging. To turn off
the robot, move the robot away from the charging dock and press and hold
the power button for 3 seconds.
Do Not Disturb (DND) Mode
Fast Mapping
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Connected
When the robot is set to Do Not Disturb (DND) mode, the robot will be prevented
from resuming cleaning and the power indicator will turn off. DND mode is
disabled by default at the factory. You can use the app to enable DND mode or
modify the DND period. The DND period is 22:00–8:00 by default.
After configuring the network for the first time, follow the instructions in the
app to quickly create a map. The robot will start mapping without cleaning.
When the robot returns to the charging dock, the mapping process has been
completed and the map will be saved automatically.
Note:
QR Code
· The scheduled cleaning tasks will be performed as usual during the DND period.
· The robot will resume cleanup where it left off after the DND period expires.
Spot Cleaning
Start Cleaning
Press the power button to start cleaning after the robot is turned on. Then,
the robot will accurately map out a route, methodically clean along the
edges and walls, then finish by cleaning each room in an S-shaped pattern
to ensure a thorough job.
Note: It is recommended that the robot set out from the charging dock
before cleaning. Do not move the charging dock while the robot is cleaning.
This ensures that the robot returns to charging dock smoothly.
When the robot is awaiting, press briefly the button to enable the spot
cleaning mode. In this mode, the robot cleans a square-shaped area of 1.5 x
1.5 meters around it and returns to its starting point once the spot cleaning is
completed.
Note:
Note:
Pause/Sleep
Robot Restarting
When the robot is running, press any button to pause it.
·If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to
finish the Wi-Fi connection.
·To disconnect the device from Wi-Fi network, press and hold the Reset
button on the robot for 3 seconds.
·Only 2.4 GHz Wi-Fi is supported.
·Due to upgrades in the app software, the actual operations may differ from
the directions in this manual. Please follow the instructions based on the
current app version.
If the robot stops responding or cannot be turned off, press and hold the power
button for 10 seconds to forcefully turn it off. Then, press and hold the power
button for 3 seconds to turn the robot on.
If the robot is paused for more than 10 minutes, it automatically enters
sleep mode. All indicators on the robot will turn off. Press any button on the
robot, or use the app to wake up the robot.
Note: If the robot is paused and placed onto the charging dock, the current
cleaning task will end.
11
12