Текст страницы
EN EN Routine Maintenance
How to Use
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
3. Align the mopping module as indicated by the arrow, then slide it into
the back of the robot until it clicks into place. Press the power button or use
Dreamehome app to start cleaning.
4. When the robot finishes a cleaning task and returns to the base station,
remove the mopping module and wash the mop pad in time. To remove the
water tank, slide the two release clips on the side of it to take it out.
Part
Maintenance
Frequency
Replacement Period
Part
Maintenance
Frequency
Replacement Period
Mop pad
After each use
Every 3 to 6 months
Robot's auto-empty vents
Main Brush
Every 6 to 12 months
Bumper
Side Brush
Once every 2 weeks
Omnidirectional wheel
Click
Once every month
Every 3 to 6 months
Dust box's filter
Return-to-Base Sensor
/
Cliff sensors
Base station's
signaling area
Click
Bottom of the robot
Charging contacts
Dust box
Once every month
/
Clean it as needed
Water Tank
Base station's
auto-empty vents
Dust bag
/
Every 2 to 4 months
Laser Distance Sensor
(LDS)
Note:
· It is not recommended to use the mopping function on carpets.
· Use the app to adjust the water flow as required.
Note: When the robot is charging or not in use, remove the mopping
module, pour out all the remaining water in the water tank, and clean the
mop pad to prevent mildew or odors.
Note: The replacement frequency will depend on your usage of the robot. If an exception occurs due to special circumstances, the parts should be replaced.
16
17