Текст страницы
EN
EN
Before Use
Connecting with Dreamehome App
4. Charge the Robot
1. Download Dreamehome App
2. Add Device
Open the Dreamehome app, tap "Scan QR code to connect", and scan the
same QR code on the robot again to add the device.
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
When placing the robot, align the charging contacts at the bottom of the
robot with the charging contacts of the base station, and the robot will
automatically turn on and start charging.
Note:
• If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to
finish the Wi-Fi connection.
• To disconnect the device from Wi-Fi network, press and hold the Reset
button on the robot for 3 seconds.
Wi-Fi Indicator
· Blinking slowly: To be connected
· Blinking quickly: Connecting
· On: Wi-Fi connected
QR Code
Note:
Note: It is recommended to fully charge your robot before first time use.
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may differ
from the directions in this manual. Please follow the instructions based on
the current app version.
12
13